Vlog 413: Go with the flow
After months of painstaking procrastination, the time finally came to paint some gelcoat (and then flowcoat) onto my rebuilt transom on the project boat, Twiggy. However, it appears Twiggy has cellulite.
Continue reading
Category: Twiggy
Vlog 408: Bleep!
Honestly, it’s nearly done, I swear, but Twiggy’s bottom needed a final layer of fibreglass to bump it up a bit, as well as some chopped strand mat around the corners, then a load of filler to join up all the gaps. This was filmed over two trips and with a very windy day, lead to much swearing (which I have bleeped, for your delicate ears)
Continue reading
Vlog 403: High Fibre
It’s an event that few thought would ever happen but I have finally applied three (so far) sheets of 1708 biaxial fibreglass over the back of my project boat, Twiggy, and this video documents that sticky process, using Atlac 580 vinylester resin.
Continue reading
Vlog 399: The Transom of the Opera
For those who thought this day would never come, prepare to have your world shaken to the core – I have finally slapped resin all over the new wood core for Twiggy’s transom, and pushed it into place on the back of the boat. Now I just need to fibreglass over the top of it.
Continue reading
Vlog 396: Gunge Tank
I had to pop back to my project boat Twiggy to fetch something for use at home, so while I was there I put some better filler in the cabin holes, as well as trying to install a new bilge pump. But that’s about the extent of it…
Continue reading
Vlog 393: Well Gel
Getting some quick ‘hits’ done on my project boat Twiggy, which included attempting to use gelcoat filler to patch up some holes inside the cabin.
Continue reading
Vlog 391: Bilge Water
After interminable weeks of rain, I thought I’d better pop over to my project boat, Twiggy, and just see how it’s surviving at the boatyard. Also managed to do a tiny bit of work.
Continue reading
Vlog 382: Super Ply Guy
After being called away unexpectedly when I was last working on my fibreglass project cruiser, Twiggy, I was able to return a couple of weeks later to continue shaping the second chunk of wood that will make up the new transom core.
Continue reading
Vlog 380: The best laid plans…
This was supposed to be a very productive day when I almost finished the new wood core for my fibreglass cruiser’s transom, however part-way through I was called away. So this episode documents what small progress I managed to make on that occasion.
Continue reading
Vlog 378: Wood it fit?
In this episode I make a template for the new wood core of my boat’s transom and then cut it out of two sheets of marine plywood (and also explain why in the end I went with marine ply). The question is, having made a template that fits beautifully, will that mean the wood version will fit? Well, this is DIY…
Continue reading